Features

  • Explore a wide RF spectrum

    Main-unit and PCB options support 1MHz–6GHz half-duplex RF reception and transmission.

  • Capture signals for your experiments

    Work with up to 20MS/s and 8-bit I + 8-bit Q samples using compatible SDR software.

  • Choose the configuration for your project

    Select a bare PCB, enclosed main unit, or one of five accessory bundles. Included items differ by configuration.

  • Build the RF path you need

    Separate antenna sets are available with or without the supplier-labelled 6GHz amplifier. These two accessory options do not include an SDR.

  • Develop with an open SDR ecosystem

    Use USB connectivity, software-controlled RX/TX gain and baseband filters, clock connections, and expansion headers for RF development.

Overview

1MHz–6GHzSDR frequency range
20MHzMaximum instantaneous bandwidth
20MSPSMaximum sample rate
8-bit I/QSample resolution per component

An RF platform for hands-on development

Choose an enclosed main unit, bare PCB or a kit matched to your project. Main-unit and PCB options use the R9 hardware platform for 1MHz–6GHz half-duplex SDR operation. The image shows Kit 5; other options contain different items.

Kit 5 complete set

Receive, Record, and Experiment

Use compatible software such as GNU Radio or SDR# for RF learning, signal recording and communication experiments. RX/TX gain and baseband filters can be configured in software.

Front view of SDR board

Configure the RF Signal Path

Select antennas and RF accessories appropriate for the operating frequency. Antenna-only configurations contain no SDR main unit. The supplier-labelled 6GHz enclosed amplifier has no confirmed gain specification; it is not assumed to be the same as other pictured amplifier modules.

RF shield and antenna connector

Clock Module Options

Kit 2, Kit 3, Kit 4 and Board + Antenna Kit include a clock module. Its model, frequency and accuracy are not specified. Kit 5 includes a different small module board whose function remains unconfirmed.

Clock module reference; included only in configurations explicitly listing a clock module

USB, Clock, and Expansion Connections

The SDR hardware provides high-speed USB 2.0, SMA antenna and clock connectors, programming buttons and internal expansion headers. The included USB cable and enclosure depend on the selected configuration.

USB, clock and expansion interfaces

Inspect the Board, Plan Your Build

Bare PCB configurations are supplied without an enclosure. Enclosed main units and accessory bundles are separate choices. Review the selected configuration and its package contents before ordering.

Rear of SDR board

Operating Precautions

  • Stop reception and transmission, then disconnect power before changing RF connections.
  • Connect an appropriate antenna or matched load before transmitting.
  • Use suitable USB power and follow the supplied hardware guidance.
  • Follow amplifier IN/OUT markings and the direction of signal flow.
  • Start the SDR before powering an external amplifier; power off the amplifier first during shutdown.
  • Use only for lawful learning, RF testing and development.
Directional amplifier connection reference

Connection reference only. The diagram does not imply that every configuration includes an amplifier.

Specifications

The following specifications apply to the SDR hardware, not to antenna-only options.

Applicable optionsSDR main-unit and PCB configurations only; accessories sold separately do not contain an SDR.
Hardware revisionR9, as confirmed in the supplied product information
Frequency range1MHz–6GHz
Instantaneous bandwidthUp to 20MHz
Operating modeHalf-duplex
Maximum sample rate20MS/s
Sample resolution8-bit I + 8-bit Q
InterfaceHigh-speed USB 2.0
PowerUSB powered
Antenna connectorSMA female
Clock interfacesSMA female, clock input and output
Software-controlled settingsRX/TX gain and baseband filters
Antenna-port powerSoftware controlled, 3.3V / 50mA
Software examplesGNU Radio; SDR# (requires suitable drivers and configuration)
ExpansionProgramming buttons and internal headers

Applications

  • RF learning and frequency exploration
  • Signal recording and communication experiments
  • Software-defined radio development

Resources & Getting Started

Package Contents by Configuration

Select Configuration above. Only the items listed for that option are supplied. Unidentified modules are described by their appearance; specifications have not been assumed.

Kit 5 - Complete Set

SKU: LV-HRF-R9-KIT5

Enclosed SDR main unit ×1; USB cable ×1; magnetic-base antennas ×3; flat antenna ×1; telescopic antenna ×1; RF jumper ×1; small module board ×1; shielded dual-RF-port module ×1.

Kit 5 - Complete Set packing contents

Board + Antenna Kit

SKU: LV-HRF-R9-PCB-ANT

Green PCB ×1; USB cable ×1; magnetic-base antennas ×2; flat antenna ×1; telescopic antenna ×1; clock module ×1.

Board + Antenna Kit packing contents

Antenna Kit + 6GHz Amplifier - No SDR

SKU: LV-HRF-R9-ANT-AMP6G

Complete antenna kit; enclosed amplifier ×1; RF jumper ×1. No SDR main unit. Amplifier is supplier-labelled 6GHz; other amplifier specifications are unconfirmed.

Antenna Kit + 6GHz Amplifier - No SDR packing contents

Green PCB Only

SKU: LV-HRF-R9-PCB-GRN

Green bare PCB ×1. No enclosure.

Green PCB Only packing contents

Kit 1

SKU: LV-HRF-R9-KIT1

Enclosed SDR main unit ×1; USB cable ×1; magnetic-base antenna ×1; long telescopic antenna ×1; short telescopic antenna ×1.

Kit 1 packing contents

Kit 3

SKU: LV-HRF-R9-KIT3

Enclosed SDR main unit ×1; USB cable ×1; magnetic-base antennas ×2; flat antenna ×1; telescopic antenna ×1; clock module ×1.

Kit 3 packing contents

Kit 4

SKU: LV-HRF-R9-KIT4

Enclosed SDR main unit ×1; USB cable ×1; magnetic-base antennas ×3; flat antenna ×1; telescopic antenna ×1; clock module ×1; shielded dual-RF-port module ×1.

Kit 4 packing contents

Antenna Kit Only - No SDR

SKU: LV-HRF-R9-ANT-SET

Flat antenna ×1; slender magnetic-base antennas ×2; short rod antenna with matching magnetic base ×1 set. No SDR main unit.

Antenna Kit Only - No SDR packing contents

Main Unit Only

SKU: LV-HRF-R9-UNIT

Black enclosed SDR main unit ×1. No antenna or cable shown in the supplied packing image.

Main Unit Only packing contents

Green PCB + Telescopic Antenna

SKU: LV-HRF-R9-PCB-GRN-TEL

Green bare PCB ×1; telescopic antenna ×1; USB cable ×1.

Green PCB + Telescopic Antenna packing contents

Kit 2

SKU: LV-HRF-R9-KIT2

Enclosed SDR main unit ×1; USB cable ×1; magnetic-base antenna ×1; long telescopic antenna ×1; short telescopic antenna ×1; clock module ×1.

Kit 2 packing contents

FAQ

Do all options include an SDR main unit?

No. Antenna Kit Only - No SDR and Antenna Kit + 6GHz Amplifier - No SDR are accessory-only options. All other configurations include an SDR main unit or PCB.

Is a clock module included?

A clock module is listed for Kit 2, Kit 3, Kit 4 and Board + Antenna Kit. Kit 5 contains a different small board whose function is unconfirmed. Clock frequency, accuracy and model have not been provided.

Does the kit include a PortaPack?

No PortaPack or microSD card is shown in the confirmed packing lists. PortaPack-dependent functions require additional compatible hardware and software.

Connection & Operating Notes

Stop reception/transmission and disconnect power before changing RF connections. Connect an appropriate antenna or matched load before transmitting. Follow the IN/OUT markings on any directional amplifier. Start the SDR before powering an external amplifier; power off the amplifier first during shutdown. Use this equipment for lawful learning, testing and development.