
Features
- Explore a wide RF spectrum
Main-unit and PCB options support 1MHz–6GHz half-duplex RF reception and transmission.
- Capture signals for your experiments
Work with up to 20MS/s and 8-bit I + 8-bit Q samples using compatible SDR software.
- Choose the configuration for your project
Select a bare PCB, enclosed main unit, or one of five accessory bundles. Included items differ by configuration.
- Build the RF path you need
Separate antenna sets are available with or without the supplier-labelled 6GHz amplifier. These two accessory options do not include an SDR.
- Develop with an open SDR ecosystem
Use USB connectivity, software-controlled RX/TX gain and baseband filters, clock connections, and expansion headers for RF development.
Overview
An RF platform for hands-on development
Choose an enclosed main unit, bare PCB or a kit matched to your project. Main-unit and PCB options use the R9 hardware platform for 1MHz–6GHz half-duplex SDR operation. The image shows Kit 5; other options contain different items.

Receive, Record, and Experiment
Use compatible software such as GNU Radio or SDR# for RF learning, signal recording and communication experiments. RX/TX gain and baseband filters can be configured in software.

Configure the RF Signal Path
Select antennas and RF accessories appropriate for the operating frequency. Antenna-only configurations contain no SDR main unit. The supplier-labelled 6GHz enclosed amplifier has no confirmed gain specification; it is not assumed to be the same as other pictured amplifier modules.

Clock Module Options
Kit 2, Kit 3, Kit 4 and Board + Antenna Kit include a clock module. Its model, frequency and accuracy are not specified. Kit 5 includes a different small module board whose function remains unconfirmed.

USB, Clock, and Expansion Connections
The SDR hardware provides high-speed USB 2.0, SMA antenna and clock connectors, programming buttons and internal expansion headers. The included USB cable and enclosure depend on the selected configuration.

Inspect the Board, Plan Your Build
Bare PCB configurations are supplied without an enclosure. Enclosed main units and accessory bundles are separate choices. Review the selected configuration and its package contents before ordering.

Operating Precautions
- Stop reception and transmission, then disconnect power before changing RF connections.
- Connect an appropriate antenna or matched load before transmitting.
- Use suitable USB power and follow the supplied hardware guidance.
- Follow amplifier IN/OUT markings and the direction of signal flow.
- Start the SDR before powering an external amplifier; power off the amplifier first during shutdown.
- Use only for lawful learning, RF testing and development.

Connection reference only. The diagram does not imply that every configuration includes an amplifier.
Specifications
The following specifications apply to the SDR hardware, not to antenna-only options.
| Applicable options | SDR main-unit and PCB configurations only; accessories sold separately do not contain an SDR. |
|---|---|
| Hardware revision | R9, as confirmed in the supplied product information |
| Frequency range | 1MHz–6GHz |
| Instantaneous bandwidth | Up to 20MHz |
| Operating mode | Half-duplex |
| Maximum sample rate | 20MS/s |
| Sample resolution | 8-bit I + 8-bit Q |
| Interface | High-speed USB 2.0 |
| Power | USB powered |
| Antenna connector | SMA female |
| Clock interfaces | SMA female, clock input and output |
| Software-controlled settings | RX/TX gain and baseband filters |
| Antenna-port power | Software controlled, 3.3V / 50mA |
| Software examples | GNU Radio; SDR# (requires suitable drivers and configuration) |
| Expansion | Programming buttons and internal headers |
Applications
- RF learning and frequency exploration
- Signal recording and communication experiments
- Software-defined radio development
Resources & Getting Started
Package Contents by Configuration
Select Configuration above. Only the items listed for that option are supplied. Unidentified modules are described by their appearance; specifications have not been assumed.
Kit 5 - Complete Set
SKU: LV-HRF-R9-KIT5
Enclosed SDR main unit ×1; USB cable ×1; magnetic-base antennas ×3; flat antenna ×1; telescopic antenna ×1; RF jumper ×1; small module board ×1; shielded dual-RF-port module ×1.

Board + Antenna Kit
SKU: LV-HRF-R9-PCB-ANT
Green PCB ×1; USB cable ×1; magnetic-base antennas ×2; flat antenna ×1; telescopic antenna ×1; clock module ×1.

Antenna Kit + 6GHz Amplifier - No SDR
SKU: LV-HRF-R9-ANT-AMP6G
Complete antenna kit; enclosed amplifier ×1; RF jumper ×1. No SDR main unit. Amplifier is supplier-labelled 6GHz; other amplifier specifications are unconfirmed.

Green PCB Only
SKU: LV-HRF-R9-PCB-GRN
Green bare PCB ×1. No enclosure.

Kit 1
SKU: LV-HRF-R9-KIT1
Enclosed SDR main unit ×1; USB cable ×1; magnetic-base antenna ×1; long telescopic antenna ×1; short telescopic antenna ×1.

Kit 3
SKU: LV-HRF-R9-KIT3
Enclosed SDR main unit ×1; USB cable ×1; magnetic-base antennas ×2; flat antenna ×1; telescopic antenna ×1; clock module ×1.

Kit 4
SKU: LV-HRF-R9-KIT4
Enclosed SDR main unit ×1; USB cable ×1; magnetic-base antennas ×3; flat antenna ×1; telescopic antenna ×1; clock module ×1; shielded dual-RF-port module ×1.

Antenna Kit Only - No SDR
SKU: LV-HRF-R9-ANT-SET
Flat antenna ×1; slender magnetic-base antennas ×2; short rod antenna with matching magnetic base ×1 set. No SDR main unit.

Main Unit Only
SKU: LV-HRF-R9-UNIT
Black enclosed SDR main unit ×1. No antenna or cable shown in the supplied packing image.

Green PCB + Telescopic Antenna
SKU: LV-HRF-R9-PCB-GRN-TEL
Green bare PCB ×1; telescopic antenna ×1; USB cable ×1.

Kit 2
SKU: LV-HRF-R9-KIT2
Enclosed SDR main unit ×1; USB cable ×1; magnetic-base antenna ×1; long telescopic antenna ×1; short telescopic antenna ×1; clock module ×1.

FAQ
Do all options include an SDR main unit?
No. Antenna Kit Only - No SDR and Antenna Kit + 6GHz Amplifier - No SDR are accessory-only options. All other configurations include an SDR main unit or PCB.
Is a clock module included?
A clock module is listed for Kit 2, Kit 3, Kit 4 and Board + Antenna Kit. Kit 5 contains a different small board whose function is unconfirmed. Clock frequency, accuracy and model have not been provided.
Does the kit include a PortaPack?
No PortaPack or microSD card is shown in the confirmed packing lists. PortaPack-dependent functions require additional compatible hardware and software.
Connection & Operating Notes
Stop reception/transmission and disconnect power before changing RF connections. Connect an appropriate antenna or matched load before transmitting. Follow the IN/OUT markings on any directional amplifier. Start the SDR before powering an external amplifier; power off the amplifier first during shutdown. Use this equipment for lawful learning, testing and development.
No guides have been linked to this product yet.
Reviews
No reviews yet.
