Features

  • Two simultaneous-sampling channels

    The ADS1292R digitizes analog signals with two 24-bit delta-sigma ADC channels.

  • ECG and respiration impedance development

    The analog front end supports ECG acquisition and includes circuitry for respiration impedance measurement.

  • SPI host interface

    Use the dedicated CS, MOSI, MISO, and SCK connections to communicate with an external microcontroller.

  • Conversion control and status signals

    START and PWDN/RESET provide hardware control, while DRDY signals when conversion data are available.

  • Onboard 3.5 mm electrode jack

    The module accepts a matching electrode cable once the jack contact assignment has been verified.

Overview

ADS1292RAnalog front end
2 channelsSimultaneous sampling
24-bitDelta-sigma conversion
SPIHost interface

Analog front-end development board

The CJMCU-1292 is a standalone module for ECG and respiration impedance prototyping. The ADS1292R integrates programmable-gain amplifiers, a reference, and an oscillator. Acquisition requires an external controller, firmware, and a compatible signal source or connection assembly.

Angled front view of the purple CJMCU-1292 board showing its electrode jack and header pads Opposite angled view showing the CJMCU-1292 components and mounting holes

Board layout and mounting

The PCB has a single row of 12 through-holes and two mounting holes. The supplied pin header requires soldering.

Rear view showing the CJMCU-1292 marking, through-holes, and mounting holes

Operating Precautions

Use a signal simulator for bench evaluation. This module is intended for development and teaching. Use independently validated equipment for patient-connected measurements or clinical use.

Specifications

CJMCU-1292 module and ADS1292R chip specifications
Board modelCJMCU-1292
Analog front-end ICADS1292R
ADC channels2, simultaneous sampling
ADC resolution and architecture24-bit delta-sigma (ΔΣ)
Integrated chip functionsProgrammable-gain amplifiers, internal reference, oscillator, and respiration impedance measurement
Digital interfaceSPI
Electrode connector3.5 mm jack
Host connectionSingle row of 12 plated through-holes
PCBPurple, with two mounting holes
HeaderSeparate, unsoldered 12-pin strip

Applications

  • Embedded SPI acquisition and firmware development
  • ECG waveform display and algorithm validation with simulated inputs
  • Respiration impedance acquisition research and bench prototyping
  • Analog front-end and ADC teaching labs

Package Contents

  • 1 × CJMCU-1292 ADS1292R module
  • 1 × Single-row 12-pin header strip, unsoldered
CJMCU-1292 module and separate header shown alongside rulers for visual scale Separate single-row 12-pin header strip

FAQ

How many ECG leads does the board provide?

The ADS1292R has two ADC channels. The ECG lead configuration depends on the board routing, electrode wiring, and firmware.

What else do I need to acquire data?

Use an external SPI controller, acquisition firmware, and a suitable test signal source. Verify the 3.5 mm jack pinout before selecting a cable.

What do the +3.3 V and +5 V markings mean?

These markings appear next to the LOGIC_SEL pads. Confirm the board's VDD requirements, logic-level compatibility, and selector setting before connecting power or a controller.

Connection & Operating Notes

Front view showing the CJMCU-1292 header labels, electrode jack, and LOGIC_SEL markings
Board header labels and functions
VDDModule power input. Verify the allowable voltage before applying power.
PWDN/RESETPower-down and reset control
STARTConversion start input
DRDYData-ready output
CSSPI chip select
MOSISPI data input to the module
MISOSPI data output from the module
SCKSPI serial clock
GPIO1Configurable digital I/O
GPIO2Configurable digital I/O
CLKClock-related connection. Verify board-specific requirements.
GNDGround reference